With Remote Connect you see and run your booths from the Pictor web app. Devices shows every booth signed in to your Pictor account, live: whether it is online, its battery, storage and printer, and which event it is running. From the same page you can launch or close an event on a booth, see its screen, and tap and type on it, without walking over to it.
📍 Where this happens: in the Pictor web app, under Devices in the left menu. The booths themselves just need the Pictor booth app open and signed in.
Watch it in action
A walkthrough with voice-over, about four and a half minutes. You'll see:
-
a booth signing in and appearing in Devices by itself, and giving it a name you'll recognise,
-
what the Status card tells you,
-
Ping, Force sync and Exit event,
-
the booth's screen live, and using it from here with Remote control,
-
switching the booth to another event with Take over running booth,
-
what happens when a booth goes offline, and when it comes back.
Before you start
-
The booth app is signed in with a user from your company. A booth appears in Devices by itself the first time it signs in; there is nothing to add by hand.
-
The booth app is up to date. Older versions do not report to Devices.
-
You have the Remote devices permissions. Seeing the page needs Remote devices: view; sending commands, the live screen and remote control need Remote devices: connect. If you don't see Devices in the menu, ask your account owner.
Find your booths
Open Devices in the left menu.

Devices, in the left menu.
The list shows each booth with its status, battery, free storage, app version, the event it is running and how many photos are still waiting to upload.

The Live badge means the list updates by itself. Online only hides booths that are switched off.
-
Search by booth name to find one quickly.
-
A battery in orange is getting low; plug that booth in.
-
A number under Uploads means photos are still waiting to upload from that booth. It goes back to 0 once they are through.
Check on a booth
Click a booth to open it. Status shows everything it reports, refreshed about once a minute while it is online.

Battery, storage, network, printer and the running event, live.
💡 Tip: Rename each booth after where it stands, such as Main Hall or Entrance. With several booths at one venue, that is how you tell them apart. Rename is at the top right of the booth's page (account owners only).
Run the booth from here
Remote commands act on the booth straight away.

Ping it, launch or close an event, sync, or clear its cache.
-
Ping: checks the booth answers. Use it when you're not sure a booth is really there.
-
Launch event: pick an event and start it on the booth. The booth downloads anything it is missing first. Tick Test launch for a trial run, or Take over running booth to replace an event that is already running.
-
Exit event: closes the running event and returns the booth to its event list.
-
Force sync: sends the booth's waiting photos now, instead of waiting for its next upload round. Use it when Uploads isn't going down.
-
Clear cache: deletes downloaded event files the booth isn't using, to free up storage. The running event is kept; the others download again before their next launch.
Every command you send is listed under Activity, with whether it worked.
Exit event and Clear cache ask before they run, because they interrupt the booth:

Guests in the middle of a session lose their progress, so pick a quiet moment.
See the booth's screen, and use it
Under Screen mirror, Screenshot shows the booth's screen once; Start mirror keeps it updating.

What the booth shows, live. Turn on Remote control to use it from here.
With Remote control on, you can:
-
click to tap the booth's screen,
-
scroll to scroll,
-
click a text field to type into it, and press Enter to send.
ℹ️ Note: On iPad, the live camera preview can't be captured, so camera screens show a dark frame in the mirror. The booth itself is working normally.
Press Stop mirror when you're done; mirroring uses the booth's network.
When a booth is offline
A booth shows Offline when it stops reporting: the app is closed, the iPad is asleep or off, or it lost its connection. Its page still shows the last status it sent.

Commands come back as soon as the booth reconnects.
A booth that drops off for a few seconds (a Wi-Fi blip, an app restart) doesn't show as offline. If it stays offline for more than a couple of minutes, check it has power, Wi-Fi and the app open.
Removing a booth
Remove, at the top right of the booth's page, takes it off the list (account owners only). It is not blocked: the next time the booth app signs in, it appears again. Use it to tidy up after replacing an iPad.
When something goes wrong
-
No Devices in the menu: you don't have the Remote devices permission; ask your account owner.
-
A booth isn't in the list: open the booth app and sign in with a user from your company. Check the app is up to date.
-
"Commands are disabled": the booth is offline. Check it has power, Wi-Fi and the app open.
-
"The device is busy" when launching an event: another event is already running on the booth. Tick Take over running booth to replace it, or Exit event first.
-
"No license available for this event": the event's licence is used up or missing. Check Billing.
-
"This event type is retired": that kind of event can no longer be launched. Contact support to move it to a current one.
-
"No response from the device": the booth may have just lost its connection. Ping it, then try again.
-
The mirror shows a dark frame: normal on camera screens on iPad (see the note above).