## 

\
With **Remote Connect** you see and run your booths from the Pictor web app. **Devices** shows every booth signed in to your Pictor account, live: whether it is online, its battery, storage and printer, and which event it is running. From the same page you can launch or close an event on a booth, see its screen, and tap and type on it, without walking over to it.

📍 **Where this happens:** in the Pictor web app, under **Devices** in the left menu. The booths themselves just need the Pictor booth app open and signed in.

## **Watch it in action**

A walkthrough with voice-over, about four and a half minutes. You'll see:

* a booth signing in and appearing in **Devices** by itself, and giving it a name you'll recognise,

* what the **Status** card tells you,

* **Ping**, **Force sync** and **Exit event**,

* the booth's screen live, and using it from here with **Remote control**,

* switching the booth to another event with **Take over running booth**,

* what happens when a booth goes offline, and when it comes back.


[download.mp4](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCSnlMcEFjPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--61afca8f2fe011d87fba21fd0a636f5eb48b6695/download.mp4?cw_video_width=1008px)

## **Before you start**

* **The booth app is signed in** with a user from your company. A booth appears in Devices by itself the first time it signs in; there is nothing to add by hand.

* **The booth app is up to date.** Older versions do not report to Devices.

* **You have the Remote devices permissions.** Seeing the page needs *Remote devices: view*; sending commands, the live screen and remote control need *Remote devices: connect*. If you don't see **Devices** in the menu, ask your account owner.

## **Find your booths**

Open **Devices** in the left menu.

![The Devices item in the Pictor web app's left menu.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCS0g1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--8cefca2b9023f1a448229bfee2435ad0b8cd69cc/80-devices-nav.jpg?cw_image_width=628.797px)

*Devices, in the left menu.*

The list shows each booth with its status, battery, free storage, app version, the event it is running and how many photos are still waiting to upload.

![The Devices list with three booths, two online and one offline, filtered by the search term Riverside.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCS0Q1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--d81cf15ca70bf4069cf19186518ccbcd0a86be5f/81-devices-list.jpg?cw_image_width=628.797px)

*The **Live** badge means the list updates by itself. **Online only** hides booths that are switched off.*

* **Search** by booth name to find one quickly.

* A battery in **orange** is getting low; plug that booth in.

* A number under **Uploads** means photos are still waiting to upload from that booth. It goes back to 0 once they are through.

## **Check on a booth**

Click a booth to open it. **Status** shows everything it reports, refreshed about once a minute while it is online.

![A booth's Status card: battery, storage, memory, network, uploads, current event, screen, printer, app version and who registered it.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCS0w1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--fcb97cc97751e1ff20bd66600d1b71a695b5c77a/82-device-status.jpg?cw_image_width=628.797px)

*Battery, storage, network, printer and the running event, live.*

💡 **Tip:** Rename each booth after where it stands, such as *Main Hall* or *Entrance*. With several booths at one venue, that is how you tell them apart. **Rename** is at the top right of the booth's page (account owners only).

## **Run the booth from here**

**Remote commands** act on the booth straight away.

![The Remote commands card with Ping, Launch event, Exit event, Force sync and Clear cache.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCS3I1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--809d2d759c2e88ef712e089923c1a0836e08f7a3/83-device-commands.jpg?cw_image_width=628.797px)

*Ping it, launch or close an event, sync, or clear its cache.*

* **Ping:** checks the booth answers. Use it when you're not sure a booth is really there.

* **Launch event:** pick an event and start it on the booth. The booth downloads anything it is missing first. Tick **Test launch** for a trial run, or **Take over running booth** to replace an event that is already running.

* **Exit event:** closes the running event and returns the booth to its event list.

* **Force sync:** sends the booth's waiting photos now, instead of waiting for its next upload round. Use it when **Uploads** isn't going down.

* **Clear cache:** deletes downloaded event files the booth isn't using, to free up storage. The running event is kept; the others download again before their next launch.

Every command you send is listed under **Activity**, with whether it worked.

**Exit event** and **Clear cache** ask before they run, because they interrupt the booth:

![The confirmation shown before closing the running event on a booth.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCSzM1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--2b5d942215d4053f1d90c80b92fd193262b44fdd/86-device-exit-confirm.jpg?cw_image_width=628.797px)

*Guests in the middle of a session lose their progress, so pick a quiet moment.*

## **See the booth's screen, and use it**

Under **Screen mirror**, **Screenshot** shows the booth's screen once; **Start mirror** keeps it updating.

![A booth's screen shown live in the Screen mirror card, with the Remote control switch above it.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCS3Y1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--1f2b54cacd5c28082e53c538afee430e5761108c/84-device-mirror.jpg?cw_image_width=628.797px)

*What the booth shows, live. Turn on **Remote control** to use it from here.*

With **Remote control** on, you can:

* **click** to tap the booth's screen,

* **scroll** to scroll,

* **click a text field** to type into it, and press Enter to send.

ℹ️ **Note:** On iPad, the live camera preview can't be captured, so camera screens show a dark frame in the mirror. The booth itself is working normally.

Press **Stop mirror** when you're done; mirroring uses the booth's network.

## **When a booth is offline**

A booth shows **Offline** when it stops reporting: the app is closed, the iPad is asleep or off, or it lost its connection. Its page still shows the last status it sent.

![An offline booth's page, with the commands greyed out and a note that they return when the booth reconnects.](https://app.chatwoot.com/rails/active_storage/blobs/redirect/eyJfcmFpbHMiOnsibWVzc2FnZSI6IkJBaHBCTEQ1b3djPSIsImV4cCI6bnVsbCwicHVyIjoiYmxvYl9pZCJ9fQ==--9971f4d8dd76c36a9a37b09c06e247bb776373e4/87-device-offline.jpg?cw_image_width=628.797px)

*Commands come back as soon as the booth reconnects.*

A booth that drops off for a few seconds (a Wi-Fi blip, an app restart) doesn't show as offline. If it stays offline for more than a couple of minutes, check it has power, Wi-Fi and the app open.

## **Removing a booth**

**Remove**, at the top right of the booth's page, takes it off the list (account owners only). It is not blocked: the next time the booth app signs in, it appears again. Use it to tidy up after replacing an iPad.

## **When something goes wrong**

* **No Devices in the menu:** you don't have the *Remote devices* permission; ask your account owner.

* **A booth isn't in the list:** open the booth app and sign in with a user from your company. Check the app is up to date.

* **"Commands are disabled":** the booth is offline. Check it has power, Wi-Fi and the app open.

* **"The device is busy" when launching an event:** another event is already running on the booth. Tick **Take over running booth** to replace it, or **Exit event** first.

* **"No license available for this event":** the event's licence is used up or missing. Check **Billing**.

* **"This event type is retired":** that kind of event can no longer be launched. Contact support to move it to a current one.

* **"No response from the device":** the booth may have just lost its connection. Ping it, then try again.

* **The mirror shows a dark frame:** normal on camera screens on iPad (see the note above).

## 


